Thursday, 15 September 2011

Audi A4 1996 Tail Lights??

This sounds like a stupid question but I can't figure out how to change my Tail Light on my 1996 Audi A4. I can pull the %26quot;Lighting Cluster%26quot; off but that only gives me access to the Brake, Blinker, Reverse and Fog Light. there are two wires going from the Cluster to the light assembly that goes to the Tail Light. The only problem is you can't get to the light from the backside and I can't pull the Tail light / assembly out the little hole it is stuck in. I took the whole Light assembly out but the light assembly can't be seperated from the back part of it which is plastic and has some kind of Adhesive sealing the two. Any Ideas on how to change the Bulb? Its very frustrated because I have a %26quot;Haynes Manual%26quot; and the Owners manual and it doesn't show these tail lights it shows the Brake and Tail light as the same bulb. HELP ME PLEASE!!!! My inspection is coming up!!!!!
Audi A4 1996 Tail Lights??
Please take it to a dealer. That tail light assembly is sealed except for the ports through which the bulbs enter. If you are not able to get to the tail light, a professional needs to take a look at it.



I wish I had better information, but it should not be a so difficult to extract the tail light bulb.



Good Luck.
Audi A4 1996 Tail Lights??
For the life of me I could not figure out why you could not extract the tail light bulb. This makes sense now. Thanks for the explanation.

Report Abuse


It is usual for the brake and tail light to be the one bulb if you look you will see it has two elements in the bulb
if you can take out the brake light, it IS the same as the tail light. the bulb has 2 filaments in it. one comes on with the lights, the other comes on with the brakes. the socket with the bulb should do a quarter turn and come out of the assembly, or if i remember, it may have a back piece that comes off the back of the assembly. if needbe, you can take it to your local autoparts store (advance or autozone) and see if they can help you out
The brake light bulb is a twin filament bulb.

No comments:

Post a Comment